CMB圆锥破碎机
A 圆锥破碎机 is a compression type of machine that reduces material by squeezing or compressing the feed material between a moving piece of steel and a stationary piece of steel.
应用程序
圆锥破碎机提供4:1至6:1的减速比. A 圆锥破碎机 with coarse-style liners would typically have a 6:1 减少 ratio, though 减少 ratios of 8:1 may be possible in certain coarse crushing applications. Fine liner configurations typically have 减少 ratios of 4:1 to 6:1.
Final sizing and 减少 are determined by the closed-side setting or the gap between the two crushing members at the lowest point. As the wedge or eccentric rotates to cause the compression within the chamber, the material gets smaller as it moves down through the wear liners as the 开放 in the cavity gets tighter. 的 crushed material is discharged at the bottom of the machine after it passes through the cavity.
封闭侧设置越紧, the finer the output; however, 容量或吞吐量也会减少. 一般来说, multiplying the closed-side setting by two is a good guide to the top size of the gradation exiting the machine.
圆锥破碎机s are ideal for crushing medium to hard materials that are dry or wet but not sticky.
CMB圆锥破碎机是如何工作的
CMB圆锥破碎机的特点是主机外壳较低 shaft, an upper frame supporting a concave bowl assembly and a tapered wedge assembly machined to correspond with the inner tapered surface of the main frame. 驱动装置转动水平副轴，小齿轮在副轴上转动 副轴转动主轴上的偏心齿轮. 这会导致 楔板总成晃动.
材料被呛进碗总成的顶部 保持一个满的破碎腔. 物料在摆动之间被压碎 楔形总成和凹形碗. 浆料从底部排出 碾碎机.
的 closed side setting, which determines product size, can be adjusted 快速，方便，而破碎机是在运行中. 在不定期的情况下 material enters the crushing chamber, a vertical lift raises the upper frame to 允许大型不可破碎的物体自由通过.
圆锥破碎机生产的能力和菠菜网最稳定正规平台_最全菠菜网大全等级是 affected by the method of feeding, characteristics of the feed material, speed 对机器、功率施加等因素的影响. 硬度、抗压 strength, mineral content and other characteristics of the material also affect 生产能力和等级.
等级和能力通常基于典型的， 分级良好的节流给粉碎机. 分级好的饲料被认为是90-100% passing the closed-side feed 开放, 40-60% passing the midpoint of the crushing chamber on the closed side (average of the closed-side feeding 开放 and the 闭边设定)，0-10%通过闭边设定.
节流给料被认为是360度的物料位置 在压碎头周围和罩帽螺母上方约6英寸处. 最大 feed size is the average of the open-side feed 开放 and the closed-side feed 开放.
最小封闭侧设置可能根据破碎情况而变化 conditions, the compressive strength of the material being crushed and stage of 减少.
为什么选择菠菜网最稳定正规平台_最全菠菜网大全 CMB圆锥破碎机
菠菜网最稳定正规平台_最全菠菜网大全 CMB圆锥破碎机是现代铸钢，全辊 bearing and feature hydraulic adjustment, which enables the operator to rapidly 在破碎机运行过程中，如果需要改变出料设置. 这些 machines feature hydraulics that also incorporate a tramp metal release, automatic reset and an unblocking feature, which will clear the crushing 几分钟后就能进入房间.
再金属化是在破碎头原地进行的. 的 short shaft configuration, which requires no top bearing, enables all major components to be removed from above, and demands minimal head room for 安装与维护.
经过验证的全滚柱轴承设计提供了更低的功率 consumption, long life, easy spares availability and the need for a more 紧凑润滑系统.
CMB圆锥破碎机的控制包括一个非接触式 in-cylinder transducer and an operating console that can be positioned close to 破碎机的. 快速释放，自密封联轴器用于连接双胞胎 在破碎机和控制台之间的液压软管. 主机工作室 the fluid tank, motorized hydraulic pump, valves, PLC instrumentation and push 按钮控件. 远程控制操作，使破碎机可以 在任何合理距离外的控制室操作.
UltraCRUSH模块化破碎
了解更多安装在模块化的底盘上, the UltraCRUSH is quick to set up and easily moveable from site to site. UltraCRUSH系统具有CMB圆锥破碎机, which includes a hydraulic adjustment system that enables producers to rapidly change the discharge setting with little interruption to production. 到达现场时，几乎已经完全组装好了, the UltraCRUSH system can be up and running in a short amount of time.
关于CMB圆锥破碎机的常见问题
向专家请教For best operating performance, CMB圆锥破碎机 must be choke fed. 节流进料确保破碎腔总是满的, 上面有材料，所以粉碎室保持满的. Crushers that are choke fed produce a more cubical product at higher throughput.
CMB 圆锥破碎机 speed settings are based on the crushing application. 以下是CMB圆锥破碎机的建议速度指南:
- 低速:二次应用，在颚式破碎机之后
- 中速:粗料砾石应用
- 标准速度:三级应用(0 x 1/2”)
- 高速:砂土应用(4m以下)
速度范围:
- 较小的封头直径(48“或更小):750-1,200 rpm
- 较大的封头直径(大于48英寸):700-950 rpm
维持最大容量水平, 级配和立方积, CMB圆锥破碎机在任何时候都必须进行节流. 的 best way to keep a choke feed to the CMB 圆锥破碎机 is with a surge bin or hopper and Feeder that are located prior to 破碎机的. Choke feeding is almost impossible to achieve without a hopper and Feeder.
的re are a number of different criteria to consider when selecting the right chambers for your crushing needs. However, the one that must always be considered is that you have a well-graded feed to the chamber. A well-graded feed is generally though to be 90-100% passing the closed-side feed 开放, 40-60% passing the midpoint and 0-10% passing the closed-side setting.
One thing you should never do is place a new concave liner in a crusher with a worn mantle or place a new mantle in a crusher with a concave liner. 为什么? 如果已正确选择待更换部件, you will change the complete profile of the 圆锥破碎机 by mating new and worn components. 接收口将趋于关闭, restricting the feed from entering the chamber and causing a 减少 in tons per hour.
衬套是否在整个腔内均匀磨损, you should consider changing out the manganese when it has worn down to about 1” (2.5厘米)厚的底部. 大约在3 / 4英寸到5/8英寸(1.9厘米至1.6 cm) thick, the manganese will crack, causing the backing material to begin to disintegrate. 这反过来又会导致衬管松动. 如果发生这种情况, continued operation could destroy the seat on the support bowl or the head of the 圆锥破碎机.
菠菜网最稳定正规平台_最全菠菜网大全 CMB圆锥破碎机 are ideal for medium to hard materials that are dry or wet.
特性 & 好处
- 产量高，菠菜网最稳定正规平台_最全菠菜网大全成型好
- 完全自动化的
- 快速方便的调整
- 维修费用低
- 大的畅通进料口
- 液压控制
- 紧凑润滑系统
- Choice of concave chamber options: extra-coarse, medium-coarse or fine
- 大直径合金钢主轴，额外的强度
- 不稳定金属释放，自动复位和腔室清理